TRAINING AND EVENTS CALENDAR & REGISTRATION
Training and Events
The calendar entries below include Customer Seminars (designed for Users, OEM’s, and System Integrators), and Distributor Seminars (designed for Distributor inside and outside sales people and Distributor technical support staff), hosted within our territory and at our manufacturer’s locations. Click on the entry for details and to register for these seminars. If you would like to schedule training at your location please contact us for details.
March
Event Details
Automated Dynamics Corp. 10320 Lake Rd., Suite 103 Houston, TX 77070 832-698-7800 Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also
Event Details
Automated Dynamics Corp.
10320 Lake Rd., Suite 103
Houston, TX 77070
832-698-7800
Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also be interested in seeing how the Crimson software operates. System Integrators and HMI programmers will learn a lot from this class. Prior controls experience is desirable but not necessary.
- The class consists of building an HMI application to monitor and control a Tank Fill & Drain example. The tank level is set from the HMI via a Tag. The tank has a Radar sensor on top that outputs a 4-20mA value based on the Level. There is also an OverFlow bit that is set when the Tank is overflowing capacity. On the bottom of the tank is a Flow/No Flow sensor that will trigger ON when the Valve is Opened and there is No Flow of water. Students will turn ON a Pump to fill the tank and will Open a valve to drain the tank.
- Class Steps
- Establish Modbus Comms to RTU/PLC
- Configure Temp_F Tag to PLC Register
- Build Simple Display Page
- Map all other Tank Tags to Registers
- Test Tank Fill Level Pump ON/OFF, Valve Open/Close
- Create Pump & Valve graphics
- Build Widget of Tank – OverFlow and Puddle design
- Create Tank Fill/Drain page of last 10 transactions
- Create DataLogger of Tank Values
- Send out Alarm text/email when Overflowing
Lunch will be provided, hope to see you there!
Time
Location
Automated Dynamics Corp. - Houston
10320 Lake Rd., Suite 103 Houston, Texas 77070
(832) 698-7800
Automated Dynamics Corp. - Houston
RSVP to This Event
RSVP ClosedRSVPing is closed at this time.
Event Details
Automated Dynamics Corp. 8813 Ridgepoint Dr., Suite 207 Irving, TX 75063 832-698-7800 Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also
Event Details
Automated Dynamics Corp.
8813 Ridgepoint Dr., Suite 207
Irving, TX 75063
832-698-7800
Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also be interested in seeing how the Crimson software operates. System Integrators and HMI programmers will learn a lot from this class. Prior controls experience is desirable but not necessary.
- The class consists of building an HMI application to monitor and control a Tank Fill & Drain example. The tank level is set from the HMI via a Tag. The tank has a Radar sensor on top that outputs a 4-20mA value based on the Level. There is also an OverFlow bit that is set when the Tank is overflowing capacity. On the bottom of the tank is a Flow/No Flow sensor that will trigger ON when the Valve is Opened and there is No Flow of water. Students will turn ON a Pump to fill the tank and will Open a valve to drain the tank.
- Class Steps
- Establish Modbus Comms to RTU/PLC
- Configure Temp_F Tag to PLC Register
- Build Simple Display Page
- Map all other Tank Tags to Registers
- Test Tank Fill Level Pump ON/OFF, Valve Open/Close
- Create Pump & Valve graphics
- Build Widget of Tank – OverFlow and Puddle design
- Create Tank Fill/Drain page of last 10 transactions
- Create DataLogger of Tank Values
- Send out Alarm text/email when Overflowing
Lunch will be provided, hope to see you there!
Time
Location
Automated Dynamics Corp. - Houston
10320 Lake Rd., Suite 103 Houston, Texas 77070
(832) 698-7800
Automated Dynamics Corp. - Houston
RSVP to This Event
Make sure to RSVP to this amazing event!
Please let us know if you can make it to the event.
RSVP Now
Yes8
4 Spots remaining
April
No Events
May
Event Details
Comfort Suites 114 Rue Fernand Lafayette, LA 70508 Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also be interested in seeing
Event Details
Comfort Suites
114 Rue Fernand
Lafayette, LA 70508
Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also be interested in seeing how the Crimson software operates. System Integrators and HMI programmers will learn a lot from this class. Prior controls experience is desirable but not necessary.
- The class consists of building an HMI application to monitor and control a Tank Fill & Drain example. The tank level is set from the HMI via a Tag. The tank has a Radar sensor on top that outputs a 4-20mA value based on the Level. There is also an OverFlow bit that is set when the Tank is overflowing capacity. On the bottom of the tank is a Flow/No Flow sensor that will trigger ON when the Valve is Opened and there is No Flow of water. Students will turn ON a Pump to fill the tank and will Open a valve to drain the tank.
- Class Steps
- Establish Modbus Comms to RTU/PLC
- Configure Temp_F Tag to PLC Register
- Build Simple Display Page
- Map all other Tank Tags to Registers
- Test Tank Fill Level Pump ON/OFF, Valve Open/Close
- Create Pump & Valve graphics
- Build Widget of Tank – OverFlow and Puddle design
- Create Tank Fill/Drain page of last 10 transactions
- Create DataLogger of Tank Values
- Send out Alarm text/email when Overflowing
Lunch will be provided, hope to see you there!
Time
Location
Automated Dynamics Corp. - Houston
10320 Lake Rd., Suite 103 Houston, Texas 77070
(832) 698-7800
Automated Dynamics Corp. - Houston
RSVP to This Event
Make sure to RSVP to this amazing event!
Please let us know if you can make it to the event.
RSVP Now
Yes
12 Spots remaining
Event Details
Comfort Suites 114 Rue Fernand Lafayette, LA 70508 Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also be interested in seeing
Event Details
Comfort Suites
114 Rue Fernand
Lafayette, LA 70508
Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also be interested in seeing how the Crimson software operates. System Integrators and HMI programmers will learn a lot from this class. Prior controls experience is desirable but not necessary.
- The class consists of building an HMI application to monitor and control a Tank Fill & Drain example. The tank level is set from the HMI via a Tag. The tank has a Radar sensor on top that outputs a 4-20mA value based on the Level. There is also an OverFlow bit that is set when the Tank is overflowing capacity. On the bottom of the tank is a Flow/No Flow sensor that will trigger ON when the Valve is Opened and there is No Flow of water. Students will turn ON a Pump to fill the tank and will Open a valve to drain the tank.
- Class Steps
- Establish Modbus Comms to RTU/PLC
- Configure Temp_F Tag to PLC Register
- Build Simple Display Page
- Map all other Tank Tags to Registers
- Test Tank Fill Level Pump ON/OFF, Valve Open/Close
- Create Pump & Valve graphics
- Build Widget of Tank – OverFlow and Puddle design
- Create Tank Fill/Drain page of last 10 transactions
- Create DataLogger of Tank Values
- Send out Alarm text/email when Overflowing
Lunch will be provided, hope to see you there!
Time
Location
Automated Dynamics Corp. - Houston
10320 Lake Rd., Suite 103 Houston, Texas 77070
(832) 698-7800
Automated Dynamics Corp. - Houston
RSVP to This Event
Make sure to RSVP to this amazing event!
Please let us know if you can make it to the event.
RSVP Now
Yes
12 Spots remaining
June
Event Details
Automated Dynamics Corp. 8813 Ridgepoint Dr., Suite 207 Irving, TX 75063 832-698-7800 Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also
Event Details
Automated Dynamics Corp.
8813 Ridgepoint Dr., Suite 207
Irving, TX 75063
832-698-7800
Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also be interested in seeing how the Crimson software operates. System Integrators and HMI programmers will learn a lot from this class. Prior controls experience is desirable but not necessary.
- The class consists of building an HMI application to monitor and control a Tank Fill & Drain example. The tank level is set from the HMI via a Tag. The tank has a Radar sensor on top that outputs a 4-20mA value based on the Level. There is also an OverFlow bit that is set when the Tank is overflowing capacity. On the bottom of the tank is a Flow/No Flow sensor that will trigger ON when the Valve is Opened and there is No Flow of water. Students will turn ON a Pump to fill the tank and will Open a valve to drain the tank.
- Class Steps
- Establish Modbus Comms to RTU/PLC
- Configure Temp_F Tag to PLC Register
- Build Simple Display Page
- Map all other Tank Tags to Registers
- Test Tank Fill Level Pump ON/OFF, Valve Open/Close
- Create Pump & Valve graphics
- Build Widget of Tank – OverFlow and Puddle design
- Create Tank Fill/Drain page of last 10 transactions
- Create DataLogger of Tank Values
- Send out Alarm text/email when Overflowing
Lunch will be provided, hope to see you there!
Time
Location
Automated Dynamics Corp. - Houston
10320 Lake Rd., Suite 103 Houston, Texas 77070
(832) 698-7800
Automated Dynamics Corp. - Houston
RSVP to This Event
Make sure to RSVP to this amazing event!
Please let us know if you can make it to the event.
RSVP Now
Yes
12 Spots remaining
Event Details
Automated Dynamics Corp. 10320 Lake Rd., Suite 103 Houston, TX 77070 832-698-7800 Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also
Event Details
Automated Dynamics Corp.
10320 Lake Rd., Suite 103
Houston, TX 77070
832-698-7800
Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also be interested in seeing how the Crimson software operates. System Integrators and HMI programmers will learn a lot from this class. Prior controls experience is desirable but not necessary.
- The class consists of building an HMI application to monitor and control a Tank Fill & Drain example. The tank level is set from the HMI via a Tag. The tank has a Radar sensor on top that outputs a 4-20mA value based on the Level. There is also an OverFlow bit that is set when the Tank is overflowing capacity. On the bottom of the tank is a Flow/No Flow sensor that will trigger ON when the Valve is Opened and there is No Flow of water. Students will turn ON a Pump to fill the tank and will Open a valve to drain the tank.
- Class Steps
- Establish Modbus Comms to RTU/PLC
- Configure Temp_F Tag to PLC Register
- Build Simple Display Page
- Map all other Tank Tags to Registers
- Test Tank Fill Level Pump ON/OFF, Valve Open/Close
- Create Pump & Valve graphics
- Build Widget of Tank – OverFlow and Puddle design
- Create Tank Fill/Drain page of last 10 transactions
- Create DataLogger of Tank Values
- Send out Alarm text/email when Overflowing
Lunch will be provided, hope to see you there!
Time
Location
Automated Dynamics Corp. - Houston
10320 Lake Rd., Suite 103 Houston, Texas 77070
(832) 698-7800
Automated Dynamics Corp. - Houston
RSVP to This Event
Make sure to RSVP to this amazing event!
Please let us know if you can make it to the event.
RSVP Now
Yes
12 Spots remaining
July
No Events
August
No Events
September
Event Details
Automated Dynamics Corp. 10320 Lake Rd., Suite 103 Houston, TX 77070 832-698-7800 Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also
Event Details
Automated Dynamics Corp.
10320 Lake Rd., Suite 103
Houston, TX 77070
832-698-7800
Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also be interested in seeing how the Crimson software operates. System Integrators and HMI programmers will learn a lot from this class. Prior controls experience is desirable but not necessary.
- The class consists of building an HMI application to monitor and control a Tank Fill & Drain example. The tank level is set from the HMI via a Tag. The tank has a Radar sensor on top that outputs a 4-20mA value based on the Level. There is also an OverFlow bit that is set when the Tank is overflowing capacity. On the bottom of the tank is a Flow/No Flow sensor that will trigger ON when the Valve is Opened and there is No Flow of water. Students will turn ON a Pump to fill the tank and will Open a valve to drain the tank.
- Class Steps
- Establish Modbus Comms to RTU/PLC
- Configure Temp_F Tag to PLC Register
- Build Simple Display Page
- Map all other Tank Tags to Registers
- Test Tank Fill Level Pump ON/OFF, Valve Open/Close
- Create Pump & Valve graphics
- Build Widget of Tank – OverFlow and Puddle design
- Create Tank Fill/Drain page of last 10 transactions
- Create DataLogger of Tank Values
- Send out Alarm text/email when Overflowing
Lunch will be provided, hope to see you there!
Time
Location
Automated Dynamics Corp. - Houston
10320 Lake Rd., Suite 103 Houston, Texas 77070
(832) 698-7800
Automated Dynamics Corp. - Houston
RSVP to This Event
Make sure to RSVP to this amazing event!
Please let us know if you can make it to the event.
RSVP Now
Yes
12 Spots remaining
Event Details
Automated Dynamics Corp. 8813 Ridgepoint Dr., Suite 207 Irving, TX 75063 832-698-7800 Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also
Event Details
Automated Dynamics Corp.
8813 Ridgepoint Dr., Suite 207
Irving, TX 75063
832-698-7800
Intended Audience: People involved with PLC programming or those who do design work of systems. Engineering personnel may also be interested in seeing how the Crimson software operates. System Integrators and HMI programmers will learn a lot from this class. Prior controls experience is desirable but not necessary.
- The class consists of building an HMI application to monitor and control a Tank Fill & Drain example. The tank level is set from the HMI via a Tag. The tank has a Radar sensor on top that outputs a 4-20mA value based on the Level. There is also an OverFlow bit that is set when the Tank is overflowing capacity. On the bottom of the tank is a Flow/No Flow sensor that will trigger ON when the Valve is Opened and there is No Flow of water. Students will turn ON a Pump to fill the tank and will Open a valve to drain the tank.
- Class Steps
- Establish Modbus Comms to RTU/PLC
- Configure Temp_F Tag to PLC Register
- Build Simple Display Page
- Map all other Tank Tags to Registers
- Test Tank Fill Level Pump ON/OFF, Valve Open/Close
- Create Pump & Valve graphics
- Build Widget of Tank – OverFlow and Puddle design
- Create Tank Fill/Drain page of last 10 transactions
- Create DataLogger of Tank Values
- Send out Alarm text/email when Overflowing
Lunch will be provided, hope to see you there!
Time
Location
Automated Dynamics Corp. - Houston
10320 Lake Rd., Suite 103 Houston, Texas 77070
(832) 698-7800
Automated Dynamics Corp. - Houston
RSVP to This Event
Make sure to RSVP to this amazing event!
Please let us know if you can make it to the event.
RSVP Now
Yes
12 Spots remaining
October
No Events
November
No Events
December
No Events
January
No Events
February
No Events
HOUSTON - HQ
10320 Lake Rd, #103
Houston, Texas 77070
1 (888) 226-9811
IRVING - DFW Office
Irving, Texas 75063
1 (888) 226-9811
